An Electric Scooter Community on a Mission to Stamp out Transportation Mediocrity.

Enjoy the juice
User avatar
By Jevako030
#57066
I'm going to try to build in 3 hall sensors for the stuttering and loud noise of the engine.
I measured them and ordered them from the Ali, they are per 3 on a print, it doesn't fit I solder them loose and use the print as a connection. I think Hall sensor should have 41 F, these have the same size as in the wheel and come closest to the specs.

https://nl.aliexpress.com/item/10050043 ... pt=glo2nld

https://nl.aliexpress.com/item/10050036 ... pt=glo2nld

Image
Image
Image
Image
Image
Image
Image
By Neojunky
#57067
Jevako030 wrote:
Fri Jul 15, 2022 11:25 pm
I'm going to try to build in 3 hall sensors for the stuttering and loud noise of the engine.
I measured them and ordered them from the Ali, they are per 3 on a print, it doesn't fit I solder them loose and use the print as a connection. I think Hall sensor should have 41 F, these have the same size as in the wheel and come closest to the specs.

https://nl.aliexpress.com/item/10050043 ... pt=glo2nld

https://nl.aliexpress.com/item/10050036 ... pt=glo2nld

Image
Image
Image
Image
Image
Image
Image
You dont need to build a hall sensor.
You could just get a foc capable esc.
User avatar
By Jevako030
#57070
You dont need to build a hall sensor.
You could just get a foc capable esc.
[/quote]


Thanks, you mean a FOC controller? I looked for that and only saw the Flipsky and for model flights. Flipsky was too expensive for me. That's why not chosen, do you know an affordable FOC controller, give me the link
By FlapjackStaxx
#57095
onlyindadescooters wrote:
Thu Jul 21, 2022 11:02 pm
installing hall sensors is not going to change anything on the Electric motor . That motor was designed to work like that it for a rental scooter
That's not 100% correct. With the stock computer yes there would be no change... but if the computer is looking for hall sensors and you add them, the motor is no different than one that comes with hall sensors to begin with. There will be a HUGE difference getting moving from stand still
By bennyzero
#57100
Bonjour,

Je cherche un tuto complet (pas a pas) pour changer le contrôleur de la trottinette Lime gen 4.
Quelqu'un pourrait m'aider ?
Je vous remercie par avance.

Google Translate:
Hello,

I am looking for a complete tutorial (step by step) to change the controller of the Lime gen 4 scooter.
Could someone help me?
I thank you in advance.
  • 1
  • 28
  • 29
  • 30
  • 31
  • 32
  • 41
LIME 3.GEN PERSONAL.....

Hi alecxs, the main Version from Emile ist runni[…]

No they's no gps in the big , removable battery yo[…]

As this was a rental version whos overstock was […]

Any one got any info on beryl bikes I seen a few[…]