- Tue Mar 03, 2020 8:11 am
#19966
the usb connected to my computer gave me an android RNDIS device (internet modem via usb. like your smartphone for internet connection on pc.) as far as i know, a android device in tethering mode cannot act as an usb storage device.
ADB did not work, as it don't recognized the com box
fun fact: when unplug the com box completely from any power source it wont boot up anymore until you use the magnet on the gps antenna. you also can stop the bootloader executing by removing the magnet quickly.
anybody has an idea what to try next?
i did, connetcted the usb data minus, usb data plus, and ground to the green connector. also connected the uart tx/rx vis versa to arduino. via serial monitor you get can see the whole boot process of the com box. but i cant manged to get a shell.
the usb connected to my computer gave me an android RNDIS device (internet modem via usb. like your smartphone for internet connection on pc.) as far as i know, a android device in tethering mode cannot act as an usb storage device.
ADB did not work, as it don't recognized the com box
fun fact: when unplug the com box completely from any power source it wont boot up anymore until you use the magnet on the gps antenna. you also can stop the bootloader executing by removing the magnet quickly.
anybody has an idea what to try next?