Page 1 of 1

Controller and ST-Link: Device protected

Posted: Sun Jun 07, 2020 4:41 am
by E39
Hi,
I have connected the controller via ST-Link2-adapter with ST-visual programmer (Windows). I'm not able to erase or flash the memory.

"The device is protected".

Any idea to switch off the write protection?

RDP is off.

Thanks in advance.
E39

Re: Controller and ST-Link: Device protected

Posted: Wed Jun 10, 2020 11:09 am
by ezscootscootscoot
Yeah I'm tripping out!!! I have flashed many ES4 ESC before and have never ran into this problem till now... if any one would be as to allow us to know a solution to this problem please do share... that way we can do less typing and more scoot scooten that would be great!!! Thanks fellas!!!

Re: Controller and ST-Link: Device protected

Posted: Wed Jun 10, 2020 2:11 pm
by Ventomann
i have the same error . i can not flash , the controller is protect (blockt) help too

Re: Controller and ST-Link: Device protected

Posted: Thu Jun 11, 2020 1:08 am
by ezscootscootscoot
Yeah I hope we find a solution to this little problem we share... before it becomes a bigger pain in the neck than it already is!!! I have tried about all the options there is to be able to write in the values??? With no luck... have never had more seen this problem before. Please do share if you find a solution, as will I. Thank you.

Re: Controller and ST-Link: Device protected

Posted: Thu Jun 11, 2020 4:13 am
by Ventomann
does anyone have an original controller lying around that he wants to sell me? then I would use the flash and use .. MFG

Re: Controller and ST-Link: Device protected

Posted: Sat Jun 20, 2020 1:06 am
by JimFiction
I have several controls in stock.
The best way to contact me is via whatsapp after you send me a privat Message Here.

ich habe mehrere steuerungen vorrätig.
Schreib mir am besten Mal bei WhatsApp, meine Nummer ge. Ich dir wenn du mir hier eine PN schreibst!
Lg

Re: Controller and ST-Link: Device protected

Posted: Sat Jun 20, 2020 1:16 am
by JimFiction
Image

Re: Controller and ST-Link: Device protected

Posted: Tue Dec 01, 2020 9:54 am
by Ventomann
As soon as I connect the controller to the pc with the st-link, the display of the lime 3.0 red is not available
can lime not flash message on the pc, no connection to the device possible ????
please help me