Electric Scooter Forum for Scooter Enthusiasts, Scooter Chargers, and Scooter Mechanics.

Help, tips, technique, and frequently asked questions.
Can someone help out? I’ve changed pretty much all parts except the actual motor (which I know works) and still these scooter won’t go. I just put new battery, new board and new controller board at the bottom and all it does is turn on and beep and pressing power button will not do anything except turn on and off. They do run because I was able to get them going with the old controller board but a couple minutes into the ride it would just stop and then the board would basically lock up and not go. So I thought replacing the board at the bottom would fix. 2 scooter same identical issue and the new power boards at the top are real boards because they connect in the no home app.

Lime Error 07

I think so because of the regenerative braking cir[…]

NineBot Max - Attempt

correct me if i’m wrong. if we use a generic[…]

Hi guys, i accidentely short circuited GND with 36[…]


i let you know So did it work?