An Electric Scooter Community on a Mission to Stamp out Transportation Mediocrity.

Discuss the Segway Ninebot ES and Ninebot Max Kick Scooter in this Forum. Topics include the Segway-Ninebot app, hardware, street riding, etc.

User avatar
By Sc00tr
LikeBB LikeBB Avatar
CHAMBAH wrote:
Sun May 23, 2021 7:44 am
Hello,what's the risk if i do this with the additional battery? Thanks
To view images REGISTER or LOGIN for full access.
What are you asking? What is the risk if you change the connector?
bagnare liked this

User avatar
By Sc00tr
LikeBB LikeBB Avatar
I’m not sure what you’re asking or if you’re asking something tbh
CHAMBAH wrote:
Wed May 26, 2021 5:03 pm
its was a bad idea to connecte the + for additional battery with the + interne battery

User avatar
By kentgravity
Posts Avatar
I dont know whats the risk but if works, let us know. Im bored of Error 42! I just want to make the connection and stick the battery without it being removed

By Olli-ftw
U connected the +- from
The external battery to the charger port?
There is a chanse it will work if you check “remove charging mode” in the cfw generator. Eventough you probably wont have the benefits of the external pack (power en speed) because the esc wont recognise the aditional pack. Once u removed the connector from the external battery, just solder some wires/connectors to the connectroller where the original connector for the external pack is. If you check the forum/youtube u will find the correct ones to connect To view images REGISTER or LOGIN for full access.

By scootsterxx
hello. im trying to charge a couple batteries from retired bird scooters. the battery has two pairs of red and black wires. one set is thin and the other is thicker. which ones are used to charge the battery;? it has been removed from the scooter. thank you.
To view images REGISTER or LOGIN for full access.

Moi aussi je l'attends à Marseille... h[…]


Hey guys...I recently, after 2 years, revisited […]

New Lime Gen4 (V2) - Okai ES400A

But be careful, this modell is NOT the Gen4 V2 O[…]

Tools required for repair

get a multimeter /. get damaged controllers and […]