I have converted a lot of he lyft scooter the 365?type. one thing open riding platform remove extra harness they install. i use board from speedwell and works great i mention this because board you are showng
An Electric Scooter Community on a Mission to Stamp out Transportation Mediocrity.
that happen because they change the positive to the negative and the negative to the positive you need to hook the black with the red and the red with the black i already did it and turn on but dont turn off i also try to change the firmware but they load like they are going to change the firmware in the controller but at the end never change fw is v0.8.0.5Nathan7500 wrote: ↑Mon Aug 12, 2019 11:36 pmHey there, since it seems like no one has tried this yet or hasn't posted about it at least anyone played with the Maxes yet? Looking into them they seem to use the same head unit as the M365 Pro, so i bought a new head unit. The cable they use in the max is a 5 pin connector between the mother board and the head unit. So I used a m365 cable (so i could connect to the pro head unit 4 pin set up) spliced the cable from the max so it had the correct connection to the mother board. After getting everything set up and ready to go turned it on it all turned on for a moment and then fried the head unit. Any help? Or I may just have to wait until the max is available and then just buy their head unit.
So did anybody successfully charged the battery?
Got any update on this? If you can read this d[…]
Do i need to do anthing else to the scooter apart […]
The way the ES-400 communicates is fundamentally[…]