- Sat Jan 18, 2020 7:43 am
#19200
No video and it’s a pain in the butt but if you pull off the tube and disconnect the wires and look down into the part where the tube connects and where the wires go to the motor there is a almost spline like but that holds the forks and suspension onto the scooter tighten this spline which can be done if you have the tool or if not then improvise I took a socket and
Ground out room for me to put flat bar stock cut to size of
Insert and welded it to socket and it works (half the time if I haven’t broken a knuckle trying to get the damn thing to fit in)
So between that and tightening the different suspension points under the rubber housing around the front shock then you should clear up that annnoying wiggle if you have any trouble then text me and I will send a quick video explaining where and whAt to do my number is six-six-9265five925 if you are in San Jose area then you can bring it by my
Shop if you like and I can fix it for you