Page 6 of 9

Re: Ninebot Max snsc 2.2/2.3 converted!

Posted: Sun Sep 26, 2021 10:33 am
by Nightriderdead
Aquaman wrote:
Thu Jun 25, 2020 12:49 pm
I have flashed BLE/DASH to 1.1.0_FULL

Could connect without IOT-BOX but it didn't recognize anything.
When connecting with IOT-box in parallel, it didn't recognize the model but told me:
DRV 3.3.7
BMS 3.5.6



Where did you connect TTL-serial, did you hook it up in parallel with IOT-BOX?
In what order do you flash, DRV(ESC) and BMS?
I just get connection timed out if I try to flash any of the DRV(ESC) fw, And write length out of range if I try to flash the BMS :(

Any tips, Please?

Did u fix this? i`m at the same spot right now. help??

Re: Ninebot Max snsc 2.2/2.3 converted!

Posted: Thu Sep 30, 2021 8:52 pm
by Hate
mrracerhacker wrote:
Mon Aug 17, 2020 12:01 pm
Risitas98 wrote:
Mon Aug 17, 2020 7:51 am
mrracerhacker wrote:
Sun Aug 16, 2020 6:25 pm


lol no special key for flashing the snsc 2,3 flash the battery through iap, then do the esc with st link then do the dash or change it and drive away, just read up more and stop spreading false informaton
OK but some ppl said that bcz voi patched their motherboard bcz it was too easy to hack. So can you show the pins for the st link pls?
Image not my image but its there, can help you more on discord if you want my name there is mrracerhacker, but its the same as ninebot max g30 just follow that guide, can even show pics of my converted ones if you want to
Can you please send me a message on how you did the 2.3 please? My name on discord is Hate#8288

Re: Ninebot Max snsc 2.2/2.3 converted!

Posted: Tue May 03, 2022 12:12 pm
by seapea44
Has VOI patched the ESC on these things?
ST-link does not work... a red led inside the esc will light up and a "Cannot connect to the target!" error is shown. I tried with two different esc's both are not connecting.
Image

EDIT: I got it working. If anyone is facing the same issue make sure you update the firmware of your ST-Link stick first!

Re: Ninebot Max snsc 2.2/2.3 converted!

Posted: Sat May 14, 2022 11:08 am
by vicenetefernandez
can u send me info also , much appreciai]ted
Risitas98 wrote:
Mon Aug 17, 2020 2:43 pm
mrracerhacker wrote:
Mon Aug 17, 2020 12:01 pm
Risitas98 wrote:
Mon Aug 17, 2020 7:51 am


OK but some ppl said that bcz voi patched their motherboard bcz it was too easy to hack. So can you show the pins for the st link pls?
Image not my image but its there, can help you more on discord if you want my name there is mrracerhacker, but its the same as ninebot max g30 just follow that guide, can even show pics of my converted ones if you want to
Thx can you give me your discord ID (with the 4 numbers that you forgot to add here)? I will flash my scooter 8 days later.

Re: Ninebot Max snsc 2.2/2.3 converted!

Posted: Thu May 26, 2022 5:56 pm
by tone_loc88
can someone plz pm me on how to open the battery deck on these snsc 2.3 it's driving me insane not being able to open this thing. I could really use some help, thanks

Re: Ninebot Max snsc 2.2/2.3 converted!

Posted: Fri May 27, 2022 11:50 am
by Andrew0135
seapea44 wrote:Has VOI patched the ESC on these things?
ST-link does not work... a red led inside the esc will light up and a "Cannot connect to the target!" error is shown. I tried with two different esc's both are not connecting.
[img]<a class="vglnk" href="[/img" rel="nofollow"><span>https</span><span>://</span><span>i</span><span>.</span><span>imgur</span><span>.</span><span>com</span><span>/</span><span>Xto7mQ9</span><span>.</span><span>jpg</span><span>[/</span><span>img</span></a>]

EDIT: I got it working. If anyone is facing the same issue make sure you update the firmware of your ST-Link stick first!




Can you send me the ESC file to flash with ST-Link Please?
My email is erbrian@protonmail.com
Thank you so very much

Re: Ninebot Max snsc 2.2/2.3 converted!

Posted: Sat May 28, 2022 9:23 am
by Andrew0135
Aquaman wrote:
Thu Jun 25, 2020 12:49 pm
I have flashed BLE/DASH to 1.1.0_FULL

Could connect without IOT-BOX but it didn't recognize anything.
When connecting with IOT-box in parallel, it didn't recognize the model but told me:
DRV 3.3.7
BMS 3.5.6



Where did you connect TTL-serial, did you hook it up in parallel with IOT-BOX?
In what order do you flash, DRV(ESC) and BMS?
I just get connection timed out if I try to flash any of the DRV(ESC) fw, And write length out of range if I try to flash the BMS :(

Any tips, Please?
Always flash
BLE
BMS
DRV


flash the BLE from 3 pin on the display dashboard with ST-Link
flash the BMS with CP2102
flash the ESC from Speed Control and ST-link

Re: Ninebot Max snsc 2.2/2.3 converted!

Posted: Sun May 29, 2022 4:32 pm
by JonDon
tone_loc88 wrote:
Thu May 26, 2022 5:56 pm
can someone plz pm me on how to open the battery deck on these snsc 2.3 it's driving me insane not being able to open this thing. I could really use some help, thanks
There is a topic about it: SNSC 2.3 Secret Battery Removal Key

Re: Ninebot Max snsc 2.2/2.3 converted!

Posted: Mon Jun 13, 2022 1:07 am
by tone_loc88
I have a snsc 2.3 I'm trying to convert but I think the esc controller is totally fried. I need to buy an aftermarket one, along with a screen/dashboard for it. can anyone recommend a controller I should use? and how the eff is someone supposed to even flash these factory dashes? there's no pinnout on them
Image
Image
Image
Image

Re: Ninebot Max snsc 2.2/2.3 converted!

Posted: Thu Jun 16, 2022 3:18 pm
by JonDon
tone_loc88 wrote:
Mon Jun 13, 2022 1:07 am
I have a snsc 2.3 I'm trying to convert but I think the esc controller is totally fried. I need to buy an aftermarket one, along with a screen/dashboard for it. can anyone recommend a controller I should use?
The most practial way is to take a Ninebot Max G30 ESC and dashboard and rewire everything.