An Electric Scooter Community on a Mission to Stamp out Transportation Mediocrity.

Discuss the Segway Ninebot ES and Ninebot Max Kick Scooter in this Forum. Topics include the Segway-Ninebot app, hardware, street riding, etc.
#24904
kenned-skov wrote:
Wed Sep 16, 2020 3:40 pm
Risitas98 wrote:
Wed Sep 16, 2020 11:13 am
kenned-skov wrote:
Tue Sep 15, 2020 1:40 pm


do you have the flash files for all 3 things ??? send me message if you have or where i can get it
Don't lose time it will not work unless you found a way to loop the motherboard into reset mode like they did with ninebot g30 and snsc 2.0 boards. And to flash bms you also need to dismount the whole battery pack. Iap bms flashing change only the version number
what can i els dooo with it ?? maybe motherboard from max G30 ?
You Will need to flash bms by st link I think then create a special cable to connect the battery to the g30 mb
#25068
Risitas98 wrote:
Thu Sep 17, 2020 11:58 am
kenned-skov wrote:
Wed Sep 16, 2020 3:40 pm
Risitas98 wrote:
Wed Sep 16, 2020 11:13 am


Don't lose time it will not work unless you found a way to loop the motherboard into reset mode like they did with ninebot g30 and snsc 2.0 boards. And to flash bms you also need to dismount the whole battery pack. Iap bms flashing change only the version number
what can i els dooo with it ?? maybe motherboard from max G30 ?
You Will need to flash bms by st link I think then create a special cable to connect the battery to the g30 mb
I have same issue , the board resets itself after several times with the battery disconnected . And then the control board starts beeping .
. How do you remove that ?
#25455
kenned-skov wrote:
Tue Sep 15, 2020 1:40 pm
Maczilla wrote:
Sat Aug 22, 2020 12:38 pm
1. Flash bms on P10 with iAp CP2102 UART to USB adapter
2. Flash esc 126 full dump by 3 wires to STLink and plug-in power in charge port.
3. Flash ble 555 full dump by 3 wires to STLink and plug-in power to the Dashboard by scooter.
do you have the flash files for all 3 things ??? send me message if you have or where i can get it
do you have files please ?
#25692
Risitas98 wrote:
Wed Sep 16, 2020 11:13 am
kenned-skov wrote:
Tue Sep 15, 2020 1:40 pm
Maczilla wrote:
Sat Aug 22, 2020 12:38 pm
1. Flash bms on P10 with iAp CP2102 UART to USB adapter
2. Flash esc 126 full dump by 3 wires to STLink and plug-in power in charge port.
3. Flash ble 555 full dump by 3 wires to STLink and plug-in power to the Dashboard by scooter.
do you have the flash files for all 3 things ??? send me message if you have or where i can get it
Don't lose time it will not work unless you found a way to loop the motherboard into reset mode like they did with ninebot g30 and snsc 2.0 boards. And to flash bms you also need to dismount the whole battery pack. Iap bms flashing change only the version number

Battery is flashable thru UART in iap

https://imgur.com/a/f8lqJo3
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 16

As this was a rental version whos overstock was […]

Any one got any info on beryl bikes I seen a few[…]

LH/ TF-100 Style Display.

Hi I recently converted a Bird Zero to a personal […]

How do you operate dash without button? I have[…]