[scooter graveyarder]

I don't understand why the 2 links don't work

I shared via a google drive it should work

https://docs.google.com/document/d/16sY ... _0Qbk/edit

let me know if the link works

anonfiles link works fine for me no problem, thanks for sharing!

[maxpower]

I don't understand why the 2 links don't work

I shared via a google drive it should work

https://docs.google.com/document/d/16sY ... _0Qbk/edit

let me know if the link works

anonfiles link works fine for me no problem, thanks for sharing!

i have tried this method and it connects to the scooter and displays various info
DRV 0.1.4
BMS 6.4.0
BLE 0.1.5
it will enter iap mode says its flashing with successfully but does not change ver
ive tried with iot connected and disconnected and tried heartbeat and unlock but
no change flashing drv and ble just say entering iap made and time out after short while
this seems like it it is locked somehow if i plug ninebot max dash in place of the max plus dash
it shows error10 and nothing seems to make any difference the ver snsc 2.3.3 drv has no st link pins
like previous any help appreciated

[careragt35]

I don't understand why the 2 links don't work

I shared via a google drive it should work

https://docs.google.com/document/d/16sY ... _0Qbk/edit

let me know if the link works

anonfiles link works fine for me no problem, thanks for sharing!

i have tried this method and it connects to the scooter and displays various info
DRV 0.1.4
BMS 6.4.0
BLE 0.1.5
it will enter iap mode says its flashing with successfully but does not change ver
ive tried with iot connected and disconnected and tried heartbeat and unlock but
no change flashing drv and ble just say entering iap made and time out after short while
this seems like it it is locked somehow if i plug ninebot max dash in place of the max plus dash
it shows error10 and nothing seems to make any difference the ver snsc 2.3.3 drv has no st link pins
like previous any help appreciated

it could be your uart adapter or bad wiring of your uart adapter because normally your drv and ble version shouldn't show up that way. And from what I understand from the tutorial you have to go directly to the command tab without flashing and click on unlock.

[maxpower]

ok so what your saying is becouse i didnt check heartbeat and unlock at first it has
made the esc drv or ble go into some type of locked state wich is why its not working
or could it be that this is the latest ver with no st link pins on the esc and a newer type iot
and ble is much bigger. i notice a post here from someone saying they have done older and
a few the newer ones via bluetooth and they say about bikes too but no further info
thanks in advance for thoughts