Page 10 of 16

Re: HOW TO FLASH STOCK FIRMWARE INTO A SNSC 2.3 (NINEBOT MAX PLUS) (VOI)

Posted: Sun Jan 30, 2022 12:23 pm
by JonDon
cyberguy wrote:
Thu Jan 27, 2022 5:28 pm
1. Dash is always on (on/off button not functioning)
2. I couldn't turn on headlight (single press to on/off button)
3. double click (on/off button) is not changing modes (stays always "S " mode)
4. max plus has 2 brake lever (left one should be disconnected from dash sockets) otherwise giving error 15
5. tail light is not flashing when brake applied.
That's about how far I got also. I think there is no way to get it all running, despite people claiming they know how to do it.

Re: HOW TO FLASH STOCK FIRMWARE INTO A SNSC 2.3 (NINEBOT MAX PLUS) (VOI)

Posted: Fri Apr 08, 2022 1:43 pm
by h4x0r1
Sylwia Mariusz wrote:
Tue Jun 22, 2021 9:46 am
You done this ?

Re: HOW TO FLASH STOCK FIRMWARE INTO A SNSC 2.3 (NINEBOT MAX PLUS) (VOI)

Posted: Thu Apr 14, 2022 9:12 am
by jaanmasi527
I might be wrong but as far as I know the g30 comes with a 300w motor and the i posted is a 350w the same as the gen2

mobdro

Re: HOW TO FLASH STOCK FIRMWARE INTO A SNSC 2.3 (NINEBOT MAX PLUS) (VOI)

Posted: Fri May 06, 2022 6:33 pm
by PotatoBill
Has anyone had any luck converting the snsc2.3 version that comes with the iot hardware integrated into the dash? So far I've had no luck connecting to the dash via stlink, UART, or Bluetooth. I did rewire the Esc>Dash connector to bring 5v to the handlebars and Rx/tx so I could plug in a stock g30 dash. However, errors abound, even when using CFW. The previous model (g30) was great, no need to purchase any components, it'd be great to figure out a way to do the same here.

Re: HOW TO FLASH STOCK FIRMWARE INTO A SNSC 2.3 (NINEBOT MAX PLUS) (VOI)

Posted: Sun May 08, 2022 6:33 pm
by ZODIAC_q
Sylwia Mariusz wrote:
Tue Jun 22, 2021 9:25 am
Can someone help me? I linked esc to st-link but the program does not connect to esc.
Hi, i have same problem. Please help

Re: HOW TO FLASH STOCK FIRMWARE INTO A SNSC 2.3 (NINEBOT MAX PLUS) (VOI)

Posted: Sun May 08, 2022 6:36 pm
by ZODIAC_q
mayaku wrote:
Thu Jul 22, 2021 10:48 pm
You're just connecting it wrong ;-)
From top view the connections are left to right:

Ground
SWCLK
SWDIO
I have same problem. Can not connect to stlink
Image

Re: HOW TO FLASH STOCK FIRMWARE INTO A SNSC 2.3 (VOI)

Posted: Sun May 08, 2022 6:38 pm
by ZODIAC_q
Maczilla wrote:
Thu Aug 13, 2020 3:05 pm
Flashing mine this weekend, Will let you guys know how it went.

Image


Update:
I flashed Bms via gps cable with iap Ninebot and esc to 1.2.6 with STLink and scooter can now drive.

Testing a fix for battery hatch lock :)
Google or pm me for more information.
Image
Image

Can you help me please

Re: HOW TO FLASH STOCK FIRMWARE INTO A SNSC 2.3 (NINEBOT MAX PLUS) (VOI)

Posted: Mon May 09, 2022 9:59 am
by Nissan
No way 🤣😅😂

Re: HOW TO FLASH STOCK FIRMWARE INTO A SNSC 2.3 (VOI)

Posted: Sat May 14, 2022 10:25 am
by vicenetefernandez
foued wrote:
Sun Aug 23, 2020 9:16 am
Image
Image


Hello
I have the solution to open the battery cover.
thank you for having answered for the solution of the voi.
I would like to have a diagram and the steps to follow and with what material because I am a novice in the field.
what sockets did u use to dissassemble the scooter, need to get me a set

Re: HOW TO FLASH STOCK FIRMWARE INTO A SNSC 2.3 (VOI)

Posted: Sat May 14, 2022 10:26 am
by vicenetefernandez
Maczilla wrote:
Sat Aug 22, 2020 12:38 pm
1. Flash bms via gps cable with CP2102 UART to USB adapter and iap Ninebot
2. Flash esc 126 full dump by 3 wires to STLink and plug-in power from battery or chargeport
3. Flash ble 110 full dump by 3 wires to STLink and plug-in power to the Dashboard by scooter.
can u send me the 3 files also if available, thanks