- Fri Oct 04, 2019 3:27 pm
#16220
i have a similar problem, only difference being motor doesnt spin freely even after disconnecting the phase wires and the hall sensor
i measured the resistance between the phase wires
blue - yellow 1.6 ohms
blue - brown 1.6 ohms
brown - yellow 0.3 ohms
so i guess the motor is fried ?
i measured the resistance between the phase wires
blue - yellow 1.6 ohms
blue - brown 1.6 ohms
brown - yellow 0.3 ohms
so i guess the motor is fried ?