An Electric Scooter Community on a Mission to Stamp out Transportation Mediocrity.

Discuss the Xiaomi mijia mi M365 original and pro versions in this forum. Topics include hardware, software, hacking, riding, and everything in between.
#20287
Hello everyone,

I'm posting after research on this forum, and YouTube, requesting for help.

My m365, the original one, with LG batteries (model of 2018).
I added a pro dashboard, and custom firmware 1.5.5 (which worked for months).

a little explanation :

2 days ago, I added a new firmware, 1.5.5 custom made with this website :
https://hackm365.com/pro/
Spanish version because my language (french) was not available, but it doesn't matter I guess.
GONKAD365

The only values I changed are these :
maximum speed in drive mod : 30 km/h
seconds before cruise control : 3
and I have 10" wheels so I used 315 instead of 345.

That's it.

I'm not sure why this change of firmware would cause issues... It worked after. And today, it doesn't.

My issues :
- it doesn't seem to turn on. The dashboard doesn't turn on, no light. However, the tail light is red, blinking very regularly, like every seconds.
- I can't turn it off.
- The voltage of my battery is 41.40 and the battery does charge.
- I can't connect my scooter to bluetooth with an app (m365 tools or downg).

Does someone have an idea ? I'd be really glad to "save" this scooter, which I use a lot.

Regards !


PS : I tried to change with my old official m365 dashboard, I was able to see it with m365 tools and downG, however I wasn't able to change the software somehow because it was 1.5.5 and not suited for this dashboard.

Edit :
if that can help, it seems to have the same problem thant this : https://www.youtube.com/watch?v=F6JWqNc ... jreload=10

I have tried to reproduce some solutions they propose into the commentary zone, it doesn't seem to work.

For information : I ordered a new dashboard, I'm gonna tell you soon if the dashboard was malfunctioning.
#20497
Hi there,

not yet. I have 2 options I guess (maybe more).

Use the original dashboard, and find a way to restore an old firmware.

Use a new dashboard pro (maybe this one has issues). I ordered one, I hope it will fix it...

Otherwise, I saw there are some generic pieces of hardware. I don't know how it works yet, but I won't throw my old scooter. I'm gonna find a way.
#20840
Hi,

I ordered a new dashboard, I put it in place, the scooter starts.
I was happy, used m365 tools, I see it and connect it. m365 downg, it works I see it, I can get infos etc.

I try to send a firmware which works better I hope, it doesn't work, doesn't send a bit.

The famous :

retry,
retry,

and I'm sure at this moment the scooter is screwed. The light blinks with the dashboard still on. I can't get the infos now, I turn it off, it doesn't turn on.

No idea.
#20928
Had the same issue.
Classic m365 with pro dashboard and custom firmware. Worked fine.
Had the scooter on charge and connected m365 tools to check the battery status. Was working fine.
Checked the scooter again after an hour and it had no power just the taillight blinking.
I tried putting the original dashboard and flash a firmware but had the: sent retry error.
My fix:
First you have to flash a ble (bluetooth )firmware and then a firmware for the drv.

1. I used esc ble v0.7.2 . from this website: https://www.spzshop.com/blogs/best-prac ... e-solution

2. And for the drv i used this website: https://m365.botox.bz/
And i think you have to click : check version twice before flashing.

As this was a rental version whos overstock was […]

Any one got any info on beryl bikes I seen a few[…]

LH/ TF-100 Style Display.

Hi I recently converted a Bird Zero to a personal […]

How do you operate dash without button? I have[…]