An Electric Scooter Community on a Mission to Stamp out Transportation Mediocrity.

Covers electric scooter models whether shared or for consumers.
By John not doe
Posts
#17299
UgloBuglo wrote:
Mon Nov 11, 2019 2:48 pm
Ivitohappy wrote:
Yes that's cool and all, but I'd say more people have a angle grinder than access to a press like that To view images REGISTER or LOGIN for full access.
Thing is I may have access to something similar haha!
and when putting it back together, what about the rubber/foam? Should I find some to put in or simply ignore it?


By Danyparis
Posts
#17362
Try this my friend
You can cut
I just did it with the same battery on VOI ES100D VOIAGER1.1
Same chassis and electronic of F350

To view images REGISTER or LOGIN for full access.

To view images REGISTER or LOGIN for full access.

To view images REGISTER or LOGIN for full access.

To view images REGISTER or LOGIN for full access.


For light you need this
To view images REGISTER or LOGIN for full access.

To view images REGISTER or LOGIN for full access.


You can modify the output tension with the little yellow screw
Plug you multimeter inside and program your new ouput tension

By xyrus
Posts
#17456
Does anybody know what the rear wheel size is? The outer size is 10 inch but what tires do I need to order if I want new ones? I'm going to try to convert the rear wheel to pneumatic, I do have a extra spare parts scooter doing nothing. Seems like a simple mod for the rear, drill a hole for the valve and that should be it. I dont think the front would be possible to convert after seeing some photos of the inside.

By Johans93
Posts
#17588
Danyparis wrote:
Wed Nov 13, 2019 7:54 pm
Try this my friend
You can cut
I just did it with the same battery on VOI ES100D VOIAGER1.1
Same chassis and electronic of F350

To view images REGISTER or LOGIN for full access.

To view images REGISTER or LOGIN for full access.



For light you need this


You can modify the output tension with the little yellow screw
Plug you multimeter inside and program your new ouput tension
No need to change the positive. Only the negative.
To view images REGISTER or LOGIN for full access.

User avatar
By jamiesj410
Posts LikeBB LikeBB Avatar
#17603
xyrus wrote:
Sun Nov 17, 2019 4:51 pm
Does anybody know what the rear wheel size is? The outer size is 10 inch but what tires do I need to order if I want new ones? I'm going to try to convert the rear wheel to pneumatic, I do have a extra spare parts scooter doing nothing. Seems like a simple mod for the rear, drill a hole for the valve and that should be it. I dont think the front would be possible to convert after seeing some photos of the inside.

U can’t put a air tire on it the wheel is not rite . U can try but u will find out . U can put a bigger solid .


By xyrus
Posts
#17657
jamiesj410 wrote:
Sat Nov 23, 2019 12:29 am
Been riding my tank a few months. Added a es4 battery inside the pole & 10” solid tires
To view images REGISTER or LOGIN for full access.
Could you share a link to the shop where you bought the tires?

By Doc95
Posts
#17729
Hi,
While waiting to receive the material, I wanted to reload the F350 and it began to blink like a Christmas tree To view images REGISTER or LOGIN for full access.

The red and white light of the scooter and also the led of the battery charger, were blinking, as if it turned on and then off.
By the way, the box with the GPS in the front of the scooter is missing.

Is the battery dead? Or is it a trouble code?
Last edited by Doc95 on Tue Dec 03, 2019 7:10 am, edited 1 time in total.


  • 1
  • 47
  • 48
  • 49
  • 50
  • 51
  • 54

I have a SNSC 2.2 were can I download the flash fi[…]

Ninebot Max G30 battery Mod

I ordered 18 Sony VTC6 batteries, to create a 3[…]

How to unlock patched bird zero

Hello ! I recently acquired a bird zero that was[…]

ES100 Shunt mod ?

Hello guys, Is there any way to solder a Shunt mod[…]