Page 18 of 35

Re: New Bird One - Model 590

Posted: Fri Sep 13, 2019 7:29 pm
by Mct0031
Dual Motor Update-

Running two 350w controllers.
Both switch power with LCD.
Rear always full power, front is selectable gear
All fits cleanly in scooter body and looks stock

Will post photos of my wiring tomorrow.

Also- LCD kit that comes with the scooter also has a password function. While in the programming function, press power and + until 4 blanks appear.

Set a 4 digit passcode.

Once you have the passcode you want , press and hold power and + again.

Now when you turn on scooter it asks for passcode.

Re: New Bird One - Model 590

Posted: Fri Sep 13, 2019 8:32 pm
by sa71n
any body know whatg error 10 is or error 30

Re: New Bird One - Model 590

Posted: Sat Sep 14, 2019 4:27 am
by jhondo
Chessnutt wrote:
Thu Jul 11, 2019 5:52 am
Here’s what I use. Simple and easy. You’ll have the front Led and brake light.
eBay has it or AliExpress
Image


Wheres the throttle input, and witch is for the motor? The bird one uses plugs for the notor now? I just need to know the inputs.

Re: NEW BIRD ONE - MODEL 590

Posted: Thu Oct 03, 2019 1:53 pm
by MeRoEinZ
Den Controller habe ich schnell gefunden aber sag mal bitte die Bezeichnung von dem Teil rechts...
Oder setz ein link rein das wäre natürlich noch besser.. Danke schön

Re: NEW BIRD ONE - MODEL 590

Posted: Thu Oct 03, 2019 8:19 pm
by Andrew BG
Hello people! I've done all steps in conversion right, but when I step on the scooter, 20 meters later it cuts off and throttle stops working.
Can't figure out what's wrong or what I've done wrong... Any ideas?
Thanks in advance!

Re: NEW BIRD ONE - MODEL 590

Posted: Fri Oct 04, 2019 2:37 am
by jamiesj410
Andrew BG wrote:
Thu Oct 03, 2019 8:19 pm
Hello people! I've done all steps in conversion right, but when I step on the scooter, 20 meters later it cuts off and throttle stops working.
Can't figure out what's wrong or what I've done wrong... Any ideas?
Thanks in advance!
More likely the battery bms is shutting down going to have to bypass it if that’s what’s going on

Re: NEW BIRD ONE - MODEL 590

Posted: Fri Oct 04, 2019 3:17 am
by Danone
Stop using Chinese controllers.
Start hacking the og esc

Re: NEW BIRD ONE - MODEL 590

Posted: Sat Oct 05, 2019 2:37 pm
by MeRoEinZ
Andrew BG wrote:
Thu Oct 03, 2019 8:19 pm
Hello people! I've done all steps in conversion right, but when I step on the scooter, 20 meters later it cuts off and throttle stops working.
Can't figure out what's wrong or what I've done wrong... Any ideas?
Thanks in advance!
Hatte das gleich Problem musst du eine andere Batterie verwenden.. Denn geht es..

Re: NEW BIRD ONE - MODEL 590

Posted: Sat Oct 05, 2019 4:58 pm
by samzone
https://www.youtube.com/watch?v=FUwSyMcAmcc&t=1720s



check this video for bird one controller installation

Re: NEW BIRD ONE - MODEL 590

Posted: Sun Oct 06, 2019 5:00 am
by Andrew BG
jamiesj410 wrote:
Fri Oct 04, 2019 2:37 am
Andrew BG wrote:
Thu Oct 03, 2019 8:19 pm
Hello people! I've done all steps in conversion right, but when I step on the scooter, 20 meters later it cuts off and throttle stops working.
Can't figure out what's wrong or what I've done wrong... Any ideas?
Thanks in advance!
More likely the battery bms is shutting down going to have to bypass it if that’s what’s going on
Any idea, how to do this? I've never dissasembled the battery, but if it's not so difficult I would have done it already. I have to cut the black and red from the output and solder'em directly, bypassing the board. Right?