Does anyone figured out how to connect this motor (from BOLT gen4) with Ninebot G30 ESC? I tried some combinations but it still working not properly.
First i tried co connect color-to-color, but motor didn't spin. Later i changed two phase wires and hall sensor wires and it spins in wrong way.
Best what i figured out is :
*If i press throttle VERY slowly - motor accelerates up to 42km/h (according to g30 ble, with g30 battery).
* If i press throttle fast - motor is pulsing
.
I have video demonstration with problem, but i don't know how to upload video here.