An Electric Scooter Community on a Mission to Stamp out Transportation Mediocrity.
Cool, it's helpful to have clear images, but it can also be the bms inside almost every fleet scooter. So what the bms on those usually does it lets you have some power (for iot) but if that is not present or the server did't say it to start, the bms won't give output, (or in this case, give output for 5 seconds). Think abput it this way, bms want encrypted message, you don't give it that, it won't give you power, therefore no fun time.2319Musk wrote:I recently acquired a veo astro4. I did replace the controller, the problem I am having is when I am at full throttle, the motor while under no load will lose power and a red light is present on the battery itself.
Connect with cmsis dap And use arterytek isp. […]
Hello!if i want to upgrade by ST-Link V2 STM8 ST[…]
Hello anyone know something about this DRV? Tha[…]
anyone know what the pinnout is on the BMS f[…]