An Electric Scooter Community on a Mission to Stamp out Transportation Mediocrity.

Covers electric scooter models whether shared or for consumers.
#12101
Hello

After reading all the threads of the different topics, I am still confused.

From what I understand there is 2 way to convert the scooter

1 :
Buy the dashboard and circuit control and replace it

https://www.ebay.fr/itm/Circuit-Control ... SwG2Jc8MbX

2 :
Buy DC motor controller with an accelerator

https://fr.aliexpress.com/item/36-V-48- ... ?spm=a2g0s. 12269583.0.0.7d6c8f12Gi1fLm

https://fr.aliexpress.com/item/Scooter- ... .html?spm= a2g0s.12269583.0.0.1f891a2eyCz3Pd

Is it 2 solutions work and if so which one is the best?

is it possible to unleash the maximum speed and update the firmware with original firmware ?

Thank you for your help and sorry for my english!
#12122
rdm0000 wrote:
Mon Jun 24, 2019 1:41 am
I talk about 2.5 Gen Lime

Image
If you want maximum flexibility i personally would go down the aftermarket controller route as in my recent bird zero conversion which is covered here (https://scootertalk.org/viewtopic.php?f ... 3&start=70).
The conversion method would be time consuming and must be one cable at a time. removing the original cables as close to the original controller as possible . then match the new controller wire colours to the original cable that is at the top in the headset . the brake switch and throttle wire colours match new controller aswell......or at least they did on my bird zero and lime s.
using this method and particular controller /throttle combo you can unlock full power and have access to loads of extra functions like voltage monitoring, speed restriction, amp control, cruise control, lights switch and loads more.
#33869
rdm0000 wrote:Hello

After reading all the threads of the different topics, I am still confused.

From what I understand there is 2 way to convert the scooter

1 :
Buy the dashboard and circuit control and replace it

https://www.ebay.fr/itm/Circuit-Control ... SwG2Jc8MbX

2 :
Buy DC motor controller with an accelerator

https://fr.aliexpress.com/item/36-V-48- ... ?spm=a2g0s. 12269583.0.0.7d6c8f12Gi1fLm

https://fr.aliexpress.com/item/Scooter- ... .html?spm= a2g0s.12269583.0.0.1f891a2eyCz3Pd

Is it 2 solutions work and if so which one is the best?

is it possible to unleash the maximum speed and update the firmware with original firmware ?

Thank you for your help and sorry for my english!
What you did at the end?

Is possible to do the option two?

As this was a rental version whos overstock was […]

Any one got any info on beryl bikes I seen a few[…]

LH/ TF-100 Style Display.

Hi I recently converted a Bird Zero to a personal […]

How do you operate dash without button? I have[…]