Javi30 wrote: ↑Fri Oct 02, 2020 12:00 am
I have two 2.5 Scooters, one with the old firmware (I have been able to unlock it with my arduino and Bluetooth module) and one presumably with the newer firmware (I can turn the light on and off but it won't unlock the motor).
The one that I was able to unlock is now not responding to serial codes and only displays the 06e error on the dash. Has anyone had this issue or would maybe be able to help me out? I'm not well versed in coding but I have made it this far and would like to finish the project up. Below is a real term reading from both Scooters, and I'd also be willing to help people out that need comparisons between the two firmwares to crack the new code.
Old Firmware Unresponsive to Serial Inputs (annotated the bytes that change based on the scooter: throttle, brake, etc)
New Firmware:
Thank you very much, and if someone could help me out that would be much appreciated!
First of all - images are not loading properly, maybe some issue of imgur, but I don't see them.
Second - 06E error seems to be common, and my solutions for it is always give a signal to controller. On normal Lime scooters seen in the city is disappearing after sending any command or restart green box (scooter). When signal comes to controller from green box, 06E is changing (disappearing) to 00,0 what is speedometer and ready for ride.
Also, when any controller I had tested and display shows 06E, it's just a simple, any command to it to "wake up" it. It seems to be locked after 10-20 minutes to 06E as security, to not ride on unlocked scooter, when someone leave it. Sometimes this 06E appear after I stop ride, and this 10 minutes time of inactivity don't count. But it seems to be exception.
To sum up:
- 06E should disappear when you send any command to controller (on, light off, light on, etc.) - the best way is to program device that sends some command interval 2-7 minutes.
- 06E should disappear after restarting scooter (this is option with green box)
And...
If you know command to enable scooter in newer version, please give some info. Thank you