[KillaH]

Here you have
Have a nice scooter!!.

Hi!

Are there the correct wires that you will hook up to the scooter?



Also, the one with a White connection, with Red/White-Green/Black wires, is that the throttle from the stearing column?

[bilou]

Hi,

yes it's correct. just be careful with throttle and break conncetion. You've just to follow this scheme

[jforum]

Hello, do you it it is possible to read the Hall Sensor signals with an arduino and calculate the speed?

My Motor controller dont have Display..

[huh12312]

So, the wiring diagrams on the tutorial were great but a little confusing. Which of the wiring that was numbered goes to the throttle? Or is it one of the connectors that just passes thru?

Thanks!

[jforum]

So, the wiring diagrams on the tutorial were great but a little confusing. Which of the wiring that was numbered goes to the throttle? Or is it one of the connectors that just passes thru?

Thanks!

Hi, the connector \ three wires with the same color: Black (-), White (Signal) and Red (+).

[Bug_meh]

is not possible to adapt the ninebot segway controller and dashboard to the 2.5 lime version?

[ccv15]

where would you put a cilinder key lock? at the red cable of lcd or at battery red (positive) cable?

[chr-benavides]

So from what I understand any motor controller 350-500Ws 35v/48v 15-20amps and a lcd dislay is ideal

[DabDabDAb]

Can anyone tell me what are connectors number 2 and number 7 ??
I disassembled the whole scooter and I haven't figured it out!

Thanks

To answer this question: 2)- back light/brake; 7 it was used in earlier models for programming i assume

[tommicek69]

Please advice, I bought a LIME 2.5, bought the system from aliexpress and the unit has a brake connection 2 cables (white and black) I do not know how to connect the original magnetic sensor from the brake. The scooter only works when I release the throttle, it moves inertia without braking with the engine. Can anyone advise me?