An Electric Scooter Community on a Mission to Stamp out Transportation Mediocrity.

Covers electric scooter models whether shared or for consumers.
By dryber
Posts
#17980
I buy in internet a electric scooter from lime company.
The seller told me that it only needs a charger and it was so cheap that I bought it anyway.
Then I figure out that it was a lime scooter and the battery was bad (blue light blinking).
So I bought a BMS and a controller in Aliexpress and this is my experience.
I telling you to do the same because I know that this procedure is bad, only use the information that could be useful in your own projects.
1. Only used the battery the frame and the motor, is possible that there is a bad battery and I have to buy a new pack.
2. Install the new BMS to the old battery
3. I made a cut on the new controller to put it inside the old controller
4 . Then I install the new screen and wire extenders to connect the screen to the controller
5. With much effort I put the battery and controller inside the frame

As a result the scooter work fine I am having speeds of 30km/h on flat and 18km of range


To view images REGISTER or LOGIN for full access.

To view images REGISTER or LOGIN for full access.

To view images REGISTER or LOGIN for full access.

To view images REGISTER or LOGIN for full access.

To view images REGISTER or LOGIN for full access.

To view images REGISTER or LOGIN for full access.


#18103
dryber wrote:
Sun Dec 08, 2019 11:34 am
I buy in internet a electric scooter from lime company.
The seller told me that it only needs a charger and it was so cheap that I bought it anyway.
Then I figure out that it was a lime scooter and the battery was bad (blue light blinking).
So I bought a BMS and a controller in Aliexpress and this is my experience.
I telling you to do the same because I know that this procedure is bad, only use the information that could be useful in your own projects.
1. Only used the battery the frame and the motor, is possible that there is a bad battery and I have to buy a new pack.
2. Install the new BMS to the old battery
3. I made a cut on the new controller to put it inside the old controller
4 . Then I install the new screen and wire extenders to connect the screen to the controller
5. With much effort I put the battery and controller inside the frame

As a result the scooter work fine I am having speeds of 30km/h on flat and 18km of range


To view images REGISTER or LOGIN for full access.

To view images REGISTER or LOGIN for full access.

To view images REGISTER or LOGIN for full access.

To view images REGISTER or LOGIN for full access.

To view images REGISTER or LOGIN for full access.

To view images REGISTER or LOGIN for full access.
All you have to do is to flash the damn dash dryber!


By dryber
Posts
#18219
Risitas98 wrote:
Thu Dec 12, 2019 3:47 pm
dryber wrote:
Sun Dec 08, 2019 11:34 am
I buy in internet a electric scooter from lime company.
The seller told me that it only needs a charger and it was so cheap that I bought it anyway.
Then I figure out that it was a lime scooter and the battery was bad (blue light blinking).
So I bought a BMS and a controller in Aliexpress and this is my experience.
I telling you to do the same because I know that this procedure is bad, only use the information that could be useful in your own projects.
1. Only used the battery the frame and the motor, is possible that there is a bad battery and I have to buy a new pack.
2. Install the new BMS to the old battery
3. I made a cut on the new controller to put it inside the old controller
4 . Then I install the new screen and wire extenders to connect the screen to the controller
5. With much effort I put the battery and controller inside the frame

As a result the scooter work fine I am having speeds of 30km/h on flat and 18km of range


To view images REGISTER or LOGIN for full access.

To view images REGISTER or LOGIN for full access.

To view images REGISTER or LOGIN for full access.

To view images REGISTER or LOGIN for full access.

To view images REGISTER or LOGIN for full access.

To view images REGISTER or LOGIN for full access.
All you have to do is to flash the damn dash dryber!
Yea I took the long way but I was fun To view images REGISTER or LOGIN for full access.
Risitas98 liked this

COVERT A WHEELS BIKE?

custom controller working. here some screens: […]

That's a battery off a JUMP 5.5 electric bike, not[…]

Ninebot SNSC2.3 please dude? :D i really n[…]

@Bug_meh yeah you can use the same display, d[…]