Re: Tier ES400 unlock development
Posted: Sun Oct 03, 2021 12:06 pm
An electric scooter community on a mission to stamp out transportation mediocrity.
https://scootertalk.org/forum/
You can cut the metal shield with a circular saw with metal blade. The base of the saw should be adjusted to cut only 3mm deep so you won't cut the cells. You then have to force it with pliers and a screwdriver to remove the cut parts that remain stuck to the adhesive.
No need to scalp this thing, but try to use threaded rods both side, and turn slowly a view hours. (it tooks me a view days) I'll give some pictures for example. It's not glueded, it's just resin filled.guillaume19851985 wrote: ↑Sun Sep 19, 2021 9:05 amHello everybody, my english isn't good excuse me
I found an old lime okei es400, i have changed thé contrôler by a Universal contrôler.
Now i want open the batterie for hack thé bms, i can't open it, i want to cut the Wear but i don't know were i do it, someone had a picture oh that?
Thanks for your time
I found 21v on three 48V packs, no way to charge correctly. But all 21700 cellsguillaume19851985 wrote: ↑Mon Sep 20, 2021 2:34 pmHello
I open the battery, how have 48v, now it's only 5v i'm thinking thé battery is empty
Inhve order à New charger