Page 132 of 136

Re: TURN A LIME OR BIRD INTO A PERSONAL SCOOTER - SEGWAY NINEBOT

Posted: Sun Jan 24, 2021 2:44 am
by kooky
Hello everyone. Thank you all for your priceless contribution.
I know it's been a while since the last post in this thread but I just got a lime s sz2,5 from a scrap yard and I want to try make it work. I read all 131 pages but as newbie I have some questions.
1. How can I check if the battery or the motor are alive before I do any modification? Because I don't know for how long this scooter was idle, so I think to check it first and then try to modify it. So, is there any way to check the condition of the battery? Should I first remove the green box and all the wires? And then how can I check if the battery works?
2. As I read in previous posts the generic controller does not support brakes. So, how do you stop? Does the brake in the left hand work or not? I didn't quite understand that part.
3. How do you charge the battery after installing the generic controller? Please explain this part to me.

The green box is still on. Haven't touch anything.
I would be grateful if someone could help me.
Thank you.

Re: LIME SCOOTER HACK: Turn a Ninebot into a Personal Scooter

Posted: Fri Feb 05, 2021 9:14 am
by Vile88
Hello friend, do you think you could share the STL files?

Re: TURN A LIME OR BIRD INTO A PERSONAL SCOOTER - SEGWAY NINEBOT

Posted: Fri Feb 26, 2021 8:20 pm
by David McMurran
kooky wrote:
Sun Jan 24, 2021 2:44 am
Hello everyone. Thank you all for your priceless contribution.
I know it's been a while since the last post in this thread but I just got a lime s sz2,5 from a scrap yard and I want to try make it work. I read all 131 pages but as newbie I have some questions.
1. How can I check if the battery or the motor are alive before I do any modification? Because I don't know for how long this scooter was idle, so I think to check it first and then try to modify it. So, is there any way to check the condition of the battery? Should I first remove the green box and all the wires? And then how can I check if the battery works?
2. As I read in previous posts the generic controller does not support brakes. So, how do you stop? Does the brake in the left hand work or not? I didn't quite understand that part.
3. How do you charge the battery after installing the generic controller? Please explain this part to me.

The green box is still on. Haven't touch anything.
I would be grateful if someone could help me.
Thank you.
If you can send me the Plate Number, I can query their API for the last status update if you would like.

Re: TURN A LIME OR BIRD INTO A PERSONAL SCOOTER - SEGWAY NINEBOT

Posted: Thu Mar 04, 2021 4:33 pm
by smansergei
Hello Is it possible to save through st-link v2 a save old firmware scooter and put on a new scooter on which the engine does not work and try to start the engine? Does the scooter work with STM32 controller?
I have Lime sj 2.5
SANTR_FW_2.4.26_20191119100000

Re: TURN A LIME OR BIRD INTO A PERSONAL SCOOTER - SEGWAY NINEBOT

Posted: Mon Mar 22, 2021 6:48 pm
by chr-benavides
Hello everyone does anyone have a schematic of there own conversion parts included

I just want to get this out my room and drive it , Thank you

Re: Turn a Lime or Bird into a Personal Scooter - Segway Ninebot

Posted: Tue Apr 13, 2021 1:04 pm
by stavrossal
Zik wrote:
Tue Dec 11, 2018 6:56 am
ZombieScoots wrote:
Mon Dec 10, 2018 7:26 am
Looks like the ES4 has some new way of wiring that doesn’t fit the motherboard you purchased. So it definitely won’t be plug and play. But I’m sure a new clip can be added
Yes in deed, I did found an abandoned Lime, looks like a ES2, don't have a external battery just a GPS module in front and this is the motherboard that I found.

Image

1. Charging port
2. This is connected through the tube to the lower part of the scooter
3. Dashboard connection
4. Connection to battery
5. Goes down through the tube to the lower part of scooter passing by a long rail just in front of battery.
6. To battery
7. That cable was unplugged. I assume to connect directly to a kind of programing interface.
8. That cable goes to GPS module, I assume one of them brings the signal to the motherboard to turn on the scooter.

Image
Userhost wrote:Anyone know how to open the plastic, rectangular Bird head unit non-destructively? I don't want to break anything, but I'm interested in seeing how these things work. The non-destructive part is important because I want to return this Bird to service once I'm done studying it.
And this is the GPS module

Just opened
Image

As you can see the circuit on the left holds the SIM card
Image

Connection description
Image

Pink arrow cable comes from motherboard.

Yellow cable it's the connection between that circuit and the big circuit to the left that holds the SIM card. I assume the white or the orange cable says to other circuit turn on the scooter.

The red arrow cable it's unplugged cable that I found in the back of module. I assume for programing.

So now I ask.

There's any way to replace the motherboard of this model? It's very different than the original one.

Or just run a jumper wires from one side to the other two complete connectivity and omit the SIM card entirely?
Hello there....
Finaly you find whitch wires must be jumper ????

Re: Turn a Lime or Bird into a Personal Scooter - Segway Ninebot

Posted: Tue Apr 13, 2021 1:45 pm
by stavrossal
math wrote:
Thu Apr 04, 2019 5:57 pm
Success, scooter is working :)
Image
hello there....
can you help me....... i want foul instructions..
Can you ;
my name is Stavros.

Re: TURN A LIME OR BIRD INTO A PERSONAL SCOOTER - SEGWAY NINEBOT

Posted: Thu Apr 15, 2021 5:40 am
by Johndow
Yeah definitely nice! Could someone please pm me the details on the convert? Did there turn out to be some sort of jumping wires / rewire procedure? Please pm me someone

Re: TURN A LIME OR BIRD INTO A PERSONAL SCOOTER - SEGWAY NINEBOT

Posted: Sat Apr 17, 2021 10:23 am
by vik sinikov
Gibrid lime,bird and ninebot . 2 battery. speed 33 km . custom firmware . Not needing BMS ninebot
Image

Re: TURN A LIME OR BIRD INTO A PERSONAL SCOOTER - SEGWAY NINEBOT

Posted: Sat Apr 17, 2021 10:42 am
by vik sinikov
Of course, 2 weeks sawed the mass of Issac Newton with a hacksaw. Because everyone with menopause and tantrums, tens of kilograms of iron were hung on scooters