- Sun Feb 14, 2021 3:06 am
#52579
I bought a kids kick scooter, with plans to convert it to electric.
The hub motor is rated at 36v 250w, which I have previously tested on another scooter. When on the other scooter, I ran it on 36v.
Plans for this scooter are to run it on 48v, at 13a. This should make it 620w. The battery has a mount, which will be mounted on the handle bar stem. Initially I'll use a cheapo china controller that's rated at 350w but I know run 620w no problem.
If it all goes well, I've ordered a spot welder so will go the full send and make a 72v battery up. It might go boom, it might not, we will see.
The silver scoot was my test scoot, so check the motor and controller were all good.
The hub motor is rated at 36v 250w, which I have previously tested on another scooter. When on the other scooter, I ran it on 36v.
Plans for this scooter are to run it on 48v, at 13a. This should make it 620w. The battery has a mount, which will be mounted on the handle bar stem. Initially I'll use a cheapo china controller that's rated at 350w but I know run 620w no problem.
If it all goes well, I've ordered a spot welder so will go the full send and make a 72v battery up. It might go boom, it might not, we will see.
The silver scoot was my test scoot, so check the motor and controller were all good.
- By nz_rackalhahn
- By missionmankind