Controller problem? 2 controllers on Bird Zero's not working right.
Posted: Sat Aug 03, 2019 1:45 pm
Just got done converting 2 Bird Zero's and I'm having the same problem on both of them. When I go to ride them, they start off fine but then when I give them full throttle the motor starts to shake/vibrate violently and they won't pick up speed. Motor spins fine with no load.
Using:
Chinese universal controller
https://rover.ebay.com/rover/0/0/0?mpre ... 4035620186
Things I've tried:
-Following the wiring troubleshoot guide (pictured).
-Resoldering all my connections
-Following the wiring troubleshoot guide and unplugging the controller from power every time, and relearning the motor with the 2 "motor learning" leads on the controller.
I have another 2 Zero's that I converted with a different Chinese controller and they both worked perfectly fine. I used a cheaper controller this time around because I thought they would work fine.
This is the controller I used for the 2 Zero's that DO work fine: https://rover.ebay.com/rover/0/0/0?mpre ... 2583980617
Maybe the new controllers I'm using are just pieces of crap?
Using:
Chinese universal controller
https://rover.ebay.com/rover/0/0/0?mpre ... 4035620186
Things I've tried:
-Following the wiring troubleshoot guide (pictured).
-Resoldering all my connections
-Following the wiring troubleshoot guide and unplugging the controller from power every time, and relearning the motor with the 2 "motor learning" leads on the controller.
I have another 2 Zero's that I converted with a different Chinese controller and they both worked perfectly fine. I used a cheaper controller this time around because I thought they would work fine.
This is the controller I used for the 2 Zero's that DO work fine: https://rover.ebay.com/rover/0/0/0?mpre ... 2583980617
Maybe the new controllers I'm using are just pieces of crap?