An Electric Scooter Community on a Mission to Stamp out Transportation Mediocrity.

Covers electric scooter models whether shared or for consumers.
By Mct0031
#15492
Dual Motor Update-

Running two 350w controllers.
Both switch power with LCD.
Rear always full power, front is selectable gear
All fits cleanly in scooter body and looks stock

Will post photos of my wiring tomorrow.

Also- LCD kit that comes with the scooter also has a password function. While in the programming function, press power and + until 4 blanks appear.

Set a 4 digit passcode.

Once you have the passcode you want , press and hold power and + again.

Now when you turn on scooter it asks for passcode.
By jhondo
#15501
Chessnutt wrote:
Thu Jul 11, 2019 5:52 am
Here’s what I use. Simple and easy. You’ll have the front Led and brake light.
eBay has it or AliExpress
Image


Wheres the throttle input, and witch is for the motor? The bird one uses plugs for the notor now? I just need to know the inputs.
User avatar
By MeRoEinZ
#16184
Den Controller habe ich schnell gefunden aber sag mal bitte die Bezeichnung von dem Teil rechts...
Oder setz ein link rein das wäre natürlich noch besser.. Danke schön
User avatar
By Andrew BG
#16194
Hello people! I've done all steps in conversion right, but when I step on the scooter, 20 meters later it cuts off and throttle stops working.
Can't figure out what's wrong or what I've done wrong... Any ideas?
Thanks in advance!
User avatar
By jamiesj410
#16202
Andrew BG wrote:
Thu Oct 03, 2019 8:19 pm
Hello people! I've done all steps in conversion right, but when I step on the scooter, 20 meters later it cuts off and throttle stops working.
Can't figure out what's wrong or what I've done wrong... Any ideas?
Thanks in advance!
More likely the battery bms is shutting down going to have to bypass it if that’s what’s going on
User avatar
By MeRoEinZ
#16236
Andrew BG wrote:
Thu Oct 03, 2019 8:19 pm
Hello people! I've done all steps in conversion right, but when I step on the scooter, 20 meters later it cuts off and throttle stops working.
Can't figure out what's wrong or what I've done wrong... Any ideas?
Thanks in advance!
Hatte das gleich Problem musst du eine andere Batterie verwenden.. Denn geht es..
User avatar
By Andrew BG
#16253
jamiesj410 wrote:
Fri Oct 04, 2019 2:37 am
Andrew BG wrote:
Thu Oct 03, 2019 8:19 pm
Hello people! I've done all steps in conversion right, but when I step on the scooter, 20 meters later it cuts off and throttle stops working.
Can't figure out what's wrong or what I've done wrong... Any ideas?
Thanks in advance!
More likely the battery bms is shutting down going to have to bypass it if that’s what’s going on
Any idea, how to do this? I've never dissasembled the battery, but if it's not so difficult I would have done it already. I have to cut the black and red from the output and solder'em directly, bypassing the board. Right?
  • 1
  • 16
  • 17
  • 18
  • 19
  • 20
  • 35

As this was a rental version whos overstock was […]

Any one got any info on beryl bikes I seen a few[…]

LH/ TF-100 Style Display.

Hi I recently converted a Bird Zero to a personal […]

How do you operate dash without button? I have[…]