An Electric Scooter Community on a Mission to Stamp out Transportation Mediocrity.

Discuss the Xiaomi mijia mi M365 original and pro versions in this forum. Topics include hardware, software, hacking, riding, and everything in between.
By armangrad@gmail.com
#16620
Hello everyone.
I have xiaomi m365 copy. It has purple board as on picture http://prntscr.com/pmcjwc
Now I want to change display and upgrade software to m365 pro.
For this I bought new display for m365 pro as on picture http://prntscr.com/pmckvc
But wire connections don't match each other.
So i have question for experts. Can I wire connections and solder them to new display.
Will be it work good?
Thx
By tifosi
#16660
I have a m365 clone scooter with the same type of PCB's as you have linked.

I tried to attach a Pro style circuit board, along with a new cord, but it didn't stay powered up very long (only 30-40 seconds) - I could never get it to stay on long enough to do anything, so I gave up and returned it to the seller.

I think in order to get a unit to have a "Pro" style display you will need a new control module and a new dash board at the minimum. The connectors from the brake lever, accelerator, and light are also different. They could be changed out to a JST style connector or spliced and soldered to change them if needed. I have my eye on a set that includes the pro style dashboard, the main control unit, a front light, a rear light, and a thumb accelerator for sale on eBay - it is from a no-name seller based in China, which gives me pause if I run into trouble. Plus, I will have to re-wire the brake lever, and then I still don't know if it will even work with my battery module...

I think it is a bit of a gamble - and expensive to try.

Let me know if you are successful doing the change - for now I am sticking with my stock fake Xioami scooter for now since it does work...
#16667
There are many videos how to change display from pro version to simple version of scooter.
Here is a weblink to results
https://www.youtube.com/results?search_ ... iaomi+m365

That guys just change display and put new upgrade by the air.
I have such display but another connections. So my question is can it suit if I cut old connections and solder new connections. May be somebody has scheme of PCB of m365 version. Which wire what to do?

As this was a rental version whos overstock was […]

Any one got any info on beryl bikes I seen a few[…]

LH/ TF-100 Style Display.

Hi I recently converted a Bird Zero to a personal […]

How do you operate dash without button? I have[…]