- Sun Dec 08, 2019 11:34 am
#17980
I buy in internet a electric scooter from lime company.
The seller told me that it only needs a charger and it was so cheap that I bought it anyway.
Then I figure out that it was a lime scooter and the battery was bad (blue light blinking).
So I bought a BMS and a controller in Aliexpress and this is my experience.
I telling you to do the same because I know that this procedure is bad, only use the information that could be useful in your own projects.
1. Only used the battery the frame and the motor, is possible that there is a bad battery and I have to buy a new pack.
2. Install the new BMS to the old battery
3. I made a cut on the new controller to put it inside the old controller
4 . Then I install the new screen and wire extenders to connect the screen to the controller
5. With much effort I put the battery and controller inside the frame
As a result the scooter work fine I am having speeds of 30km/h on flat and 18km of range
The seller told me that it only needs a charger and it was so cheap that I bought it anyway.
Then I figure out that it was a lime scooter and the battery was bad (blue light blinking).
So I bought a BMS and a controller in Aliexpress and this is my experience.
I telling you to do the same because I know that this procedure is bad, only use the information that could be useful in your own projects.
1. Only used the battery the frame and the motor, is possible that there is a bad battery and I have to buy a new pack.
2. Install the new BMS to the old battery
3. I made a cut on the new controller to put it inside the old controller
4 . Then I install the new screen and wire extenders to connect the screen to the controller
5. With much effort I put the battery and controller inside the frame
As a result the scooter work fine I am having speeds of 30km/h on flat and 18km of range