An Electric Scooter Community on a Mission to Stamp out Transportation Mediocrity.

Discuss the Segway Ninebot ES and Ninebot Max Kick Scooter in this Forum. Topics include the Segway-Ninebot app, hardware, street riding, etc.




By Bug_meh
Posts
#22342
mrracerhacker wrote:
Mon Aug 03, 2020 1:59 pm
@Bug_meh yeah you can use the same display, done it on one of my snsc 2,3
Ok! But what is different between the shared version and the non shared version?
When I am looking at ebay for a repacement, it says on many that it is not for a shared version. Mine is a shared version.
I dont care to have a shared one so for me, if it is possible to flash it as a regular one that would have been great!
Do you know if this is possible?

By Daif21
Posts
#22364
To view images REGISTER or LOGIN for full access.

To view images REGISTER or LOGIN for full access.

To view images REGISTER or LOGIN for full access.

To view images REGISTER or LOGIN for full access.

To view images REGISTER or LOGIN for full access.

To view images REGISTER or LOGIN for full access.

To view images REGISTER or LOGIN for full access.

To view images REGISTER or LOGIN for full access.

To view images REGISTER or LOGIN for full access.



The snsc 2.3 it has more similarities with esx than g30 max
The motor is a 350w aka gen2 with a drum brake.
The battery gets charged via the main board like the esx in the middle tube, where the g30 max has its own charging board and sits on the side of the battery.
The control board has also been placed in the middle tube and it looks a lot like the esx
I have tried to connect an esx dashboard but it shows error 10.
My best guess is that the wiring that connects to the dashboard is different.
Iam ordering an original g30 dashboard and will try to connect to it via Bluetooth.
I have also tried to bypass the bms but no luck either.

By Bug_meh
Posts
#22367
I got an incomplete SNSC 2.2 on my hands. It is missing the IOT box and the dash.
I am waiting on a clone dash from ebay, a UART hardware and a ST-Link.
I hope i can get this to work by flashing firmwares to all ECUs.
I hope i can bypass the missing IOT box by software.

Have you also tried to flash BMS with UART?




New Bolt Scooter

Bolt scooters in Polen https://i.imgur.com[…]

Identify and use this Controller

Obvious: +5V, 36V, VCC BATIN+, BATIN- GND Probab[…]

It is actually possible to use an esx dashboard […]

Hi. My g30 controller looks diffrend. Its a orig[…]