[meister_sd]

Where are these being rented?

[Maczilla]

How do I open the battery hatch?

[Bug_meh]

Is it the same dashboard on a G30 as on a SNSC2.2?

[mrracerhacker]

@Bug_meh yeah you can use the same display, done it on one of my snsc 2,3

[Bug_meh]

@Bug_meh yeah you can use the same display, done it on one of my snsc 2,3

Ok! But what is different between the shared version and the non shared version?
When I am looking at ebay for a repacement, it says on many that it is not for a shared version. Mine is a shared version.
I dont care to have a shared one so for me, if it is possible to flash it as a regular one that would have been great!
Do you know if this is possible?

[Daif21]

To view images REGISTER or LOGIN for full access.

To view images REGISTER or LOGIN for full access.

To view images REGISTER or LOGIN for full access.

To view images REGISTER or LOGIN for full access.

To view images REGISTER or LOGIN for full access.

To view images REGISTER or LOGIN for full access.

To view images REGISTER or LOGIN for full access.

To view images REGISTER or LOGIN for full access.

To view images REGISTER or LOGIN for full access.



The snsc 2.3 it has more similarities with esx than g30 max
The motor is a 350w aka gen2 with a drum brake.
The battery gets charged via the main board like the esx in the middle tube, where the g30 max has its own charging board and sits on the side of the battery.
The control board has also been placed in the middle tube and it looks a lot like the esx
I have tried to connect an esx dashboard but it shows error 10.
My best guess is that the wiring that connects to the dashboard is different.
Iam ordering an original g30 dashboard and will try to connect to it via Bluetooth.
I have also tried to bypass the bms but no luck either.

[Bug_meh]

I got an incomplete SNSC 2.2 on my hands. It is missing the IOT box and the dash.
I am waiting on a clone dash from ebay, a UART hardware and a ST-Link.
I hope i can get this to work by flashing firmwares to all ECUs.
I hope i can bypass the missing IOT box by software.

Have you also tried to flash BMS with UART?

[Daif21]

There are different variants
To view images REGISTER or LOGIN for full access.

To view images REGISTER or LOGIN for full access.

To view images REGISTER or LOGIN for full access.

To view images REGISTER or LOGIN for full access.

To view images REGISTER or LOGIN for full access.

To view images REGISTER or LOGIN for full access.

[thisisstan85]

There are different variants/quote]

Max= 2.0
Pro= 2.1-2.2
Plus=2.3

[thisisstan85]

To view images REGISTER or LOGIN for full access.

To view images REGISTER or LOGIN for full access.

To view images REGISTER or LOGIN for full access.

To view images REGISTER or LOGIN for full access.