- Sun Jun 21, 2020 1:46 am
#21592
Just thought I would throw this idea out there if anyone is trying to figure out where to mount the large 1000 watt BrainPower generic controller On a scooter. I removed the external battery from a old recycled ES4 battery I got on eBay for 20$ and just used the case and mounting bracket. I removed the controller from the aluminum case it was in and mounted it inside the plastic case.
Pretty simple really, just drill some holes for the wires and wire it up. I had a scooter with a fried battery bms as well as a controller that wouldn’t work. So I built a 13s battery that fits perfectly under the deck and it feels like it’s very fast. Need to check with gps or something once I have a full battery. Full battery is 54.6 and I have been riding it around 45 volts. So it should be even faster.
Downside to this is no headlight, taillight, no firmware and no apps. Just a stripped down, light weight scooter that goes fast.
I’m going to work on adding some lighting.
Pretty simple really, just drill some holes for the wires and wire it up. I had a scooter with a fried battery bms as well as a controller that wouldn’t work. So I built a 13s battery that fits perfectly under the deck and it feels like it’s very fast. Need to check with gps or something once I have a full battery. Full battery is 54.6 and I have been riding it around 45 volts. So it should be even faster.
Downside to this is no headlight, taillight, no firmware and no apps. Just a stripped down, light weight scooter that goes fast.
I’m going to work on adding some lighting.