- Sat Sep 18, 2021 1:47 pm
#55315
I meant "BMS bypass "not ABSdonKeykick wrote: ↑Wed Sep 15, 2021 5:18 pmHey guys...I recently, after 2 years, revisited this bird one 590 and started over using the SamZone method (thank you by the way I was actually able to use that method to get a lime s 2.5 up and fully functional). For this scotter the bird one 590 I ordered the 350 w brainpower with the s866 lcd and as you can hopefully see in the vid ...it works ....and then the motor stops with an e10 error and sometimes an e7. I have checked everything. I opened up the battery and used SamZones ABS bypass method and Im getting the same results as before...It has full power for about 5 to 10 seconds and then the motor stops. If I unplug the LCD cable and wait a few minutes it will start again but shut off in a few seconds. If I repeatedly keep disconnecting and reconnecting the LCD cable the motor wont turn at all...I have to wait a few between unplugging and replugging. Anyone else in here have this issue? I appreciate any and all help. Thank you guys.https://www.youtube.com/watch?v=w1tfzhsg0ps