An Electric Scooter Community on a Mission to Stamp out Transportation Mediocrity.

Covers electric scooter models whether shared or for consumers.
By feaoafhzap
domdom wrote:
Thu Sep 30, 2021 7:28 am
Vitalii wrote:
Wed Apr 29, 2020 2:42 pm
No current limiting :mrgreen:
I know you took it off with heat gun, Can you make a video pls, I am stuck removing the batteries in the the shell. I tried to heat gun all over the body but i dont know how to take it off or pull it off
You can cut the metal shield with a circular saw with metal blade. The base of the saw should be adjusted to cut only 3mm deep so you won't cut the cells. You then have to force it with pliers and a screwdriver to remove the cut parts that remain stuck to the adhesive.
Using that technique it takes only 2-3 minutes to remove the metal shield.
  • 1
  • 10
  • 11
  • 12
  • 13
  • 14 https://i.imgur[…]

Bird 2 spacers !! NIce lookin[…]

Salut, ça fait un petit moment que je reg[…]

I have successfully connected the 590 esc to a[…]