An Electric Scooter Community on a Mission to Stamp out Transportation Mediocrity.

Discuss the Segway Ninebot ES and Ninebot Max Kick Scooter in this Forum. Topics include the Segway-Ninebot app, hardware, street riding, etc.
#55532
Aquaman wrote:
Thu Jun 25, 2020 12:49 pm
I have flashed BLE/DASH to 1.1.0_FULL

Could connect without IOT-BOX but it didn't recognize anything.
When connecting with IOT-box in parallel, it didn't recognize the model but told me:
DRV 3.3.7
BMS 3.5.6



Where did you connect TTL-serial, did you hook it up in parallel with IOT-BOX?
In what order do you flash, DRV(ESC) and BMS?
I just get connection timed out if I try to flash any of the DRV(ESC) fw, And write length out of range if I try to flash the BMS :(

Any tips, Please?

Did u fix this? i`m at the same spot right now. help??
By Hate
#55591
mrracerhacker wrote:
Mon Aug 17, 2020 12:01 pm
Risitas98 wrote:
Mon Aug 17, 2020 7:51 am
mrracerhacker wrote:
Sun Aug 16, 2020 6:25 pm


lol no special key for flashing the snsc 2,3 flash the battery through iap, then do the esc with st link then do the dash or change it and drive away, just read up more and stop spreading false informaton
OK but some ppl said that bcz voi patched their motherboard bcz it was too easy to hack. So can you show the pins for the st link pls?
Image not my image but its there, can help you more on discord if you want my name there is mrracerhacker, but its the same as ninebot max g30 just follow that guide, can even show pics of my converted ones if you want to
Can you please send me a message on how you did the 2.3 please? My name on discord is Hate#8288
By seapea44
#56642
Has VOI patched the ESC on these things?
ST-link does not work... a red led inside the esc will light up and a "Cannot connect to the target!" error is shown. I tried with two different esc's both are not connecting.
Image

EDIT: I got it working. If anyone is facing the same issue make sure you update the firmware of your ST-Link stick first!
#56681
can u send me info also , much appreciai]ted
Risitas98 wrote:
Mon Aug 17, 2020 2:43 pm
mrracerhacker wrote:
Mon Aug 17, 2020 12:01 pm
Risitas98 wrote:
Mon Aug 17, 2020 7:51 am


OK but some ppl said that bcz voi patched their motherboard bcz it was too easy to hack. So can you show the pins for the st link pls?
Image not my image but its there, can help you more on discord if you want my name there is mrracerhacker, but its the same as ninebot max g30 just follow that guide, can even show pics of my converted ones if you want to
Thx can you give me your discord ID (with the 4 numbers that you forgot to add here)? I will flash my scooter 8 days later.
By Andrew0135
#56770
seapea44 wrote:Has VOI patched the ESC on these things?
ST-link does not work... a red led inside the esc will light up and a "Cannot connect to the target!" error is shown. I tried with two different esc's both are not connecting.
[img]<a class="vglnk" href="[/img" rel="nofollow"><span>https</span><span>://</span><span>i</span><span>.</span><span>imgur</span><span>.</span><span>com</span><span>/</span><span>Xto7mQ9</span><span>.</span><span>jpg</span><span>[/</span><span>img</span></a>]

EDIT: I got it working. If anyone is facing the same issue make sure you update the firmware of your ST-Link stick first!




Can you send me the ESC file to flash with ST-Link Please?
My email is erbrian@protonmail.com
Thank you so very much
By Andrew0135
#56781
Aquaman wrote:
Thu Jun 25, 2020 12:49 pm
I have flashed BLE/DASH to 1.1.0_FULL

Could connect without IOT-BOX but it didn't recognize anything.
When connecting with IOT-box in parallel, it didn't recognize the model but told me:
DRV 3.3.7
BMS 3.5.6



Where did you connect TTL-serial, did you hook it up in parallel with IOT-BOX?
In what order do you flash, DRV(ESC) and BMS?
I just get connection timed out if I try to flash any of the DRV(ESC) fw, And write length out of range if I try to flash the BMS :(

Any tips, Please?
Always flash
BLE
BMS
DRV


flash the BLE from 3 pin on the display dashboard with ST-Link
flash the BMS with CP2102
flash the ESC from Speed Control and ST-link
By tone_loc88
#56853
I have a snsc 2.3 I'm trying to convert but I think the esc controller is totally fried. I need to buy an aftermarket one, along with a screen/dashboard for it. can anyone recommend a controller I should use? and how the eff is someone supposed to even flash these factory dashes? there's no pinnout on them
Image
Image
Image
Image
User avatar
By JonDon
#56866
tone_loc88 wrote:
Mon Jun 13, 2022 1:07 am
I have a snsc 2.3 I'm trying to convert but I think the esc controller is totally fried. I need to buy an aftermarket one, along with a screen/dashboard for it. can anyone recommend a controller I should use?
The most practial way is to take a Ninebot Max G30 ESC and dashboard and rewire everything.
  • 1
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9

As this was a rental version whos overstock was […]

Any one got any info on beryl bikes I seen a few[…]

LH/ TF-100 Style Display.

Hi I recently converted a Bird Zero to a personal […]

How do you operate dash without button? I have[…]