An Electric Scooter Community on a Mission to Stamp out Transportation Mediocrity.

Discuss the Segway Ninebot ES and Ninebot Max Kick Scooter in this Forum. Topics include the Segway-Ninebot app, hardware, street riding, etc.
#56273
cyberguy wrote:
Thu Jan 27, 2022 5:28 pm
1. Dash is always on (on/off button not functioning)
2. I couldn't turn on headlight (single press to on/off button)
3. double click (on/off button) is not changing modes (stays always "S " mode)
4. max plus has 2 brake lever (left one should be disconnected from dash sockets) otherwise giving error 15
5. tail light is not flashing when brake applied.
That's about how far I got also. I think there is no way to get it all running, despite people claiming they know how to do it.
#56657
Has anyone had any luck converting the snsc2.3 version that comes with the iot hardware integrated into the dash? So far I've had no luck connecting to the dash via stlink, UART, or Bluetooth. I did rewire the Esc>Dash connector to bring 5v to the handlebars and Rx/tx so I could plug in a stock g30 dash. However, errors abound, even when using CFW. The previous model (g30) was great, no need to purchase any components, it'd be great to figure out a way to do the same here.
#56662
Maczilla wrote:
Thu Aug 13, 2020 3:05 pm
Flashing mine this weekend, Will let you guys know how it went.

Image


Update:
I flashed Bms via gps cable with iap Ninebot and esc to 1.2.6 with STLink and scooter can now drive.

Testing a fix for battery hatch lock :)
Google or pm me for more information.
Image
Image

Can you help me please
#56679
foued wrote:
Sun Aug 23, 2020 9:16 am
Image
Image


Hello
I have the solution to open the battery cover.
thank you for having answered for the solution of the voi.
I would like to have a diagram and the steps to follow and with what material because I am a novice in the field.
what sockets did u use to dissassemble the scooter, need to get me a set
#56680
Maczilla wrote:
Sat Aug 22, 2020 12:38 pm
1. Flash bms via gps cable with CP2102 UART to USB adapter and iap Ninebot
2. Flash esc 126 full dump by 3 wires to STLink and plug-in power from battery or chargeport
3. Flash ble 110 full dump by 3 wires to STLink and plug-in power to the Dashboard by scooter.
can u send me the 3 files also if available, thanks
  • 1
  • 8
  • 9
  • 10
  • 11
  • 12
  • 16

As this was a rental version whos overstock was […]

Any one got any info on beryl bikes I seen a few[…]

LH/ TF-100 Style Display.

Hi I recently converted a Bird Zero to a personal […]

How do you operate dash without button? I have[…]