Jimmyyahoo wrote: ↑Wed Aug 03, 2022 2:13 amFlash BMS with Stlink, it's an STM8. Use STVP, download the .hex firmware from GitHub in the scooterhacking repo. Pinout should be standard, starting from square pad, 3.3vcc, swim, GND, and reset. PRACTICE YOUR SOLDERING SKILLS. Use good solder and a good iron with a clean tip. It can be done,.I just knocked out two of em (snsc2.3 conversions). It's not perfect, there are kinks to work out, but you can and will get a rideable scooter if you are halfway intelligent, can parse the info that's here, or ask informed questions. I will help anyone who is actively trying, not just looking for soft food I had to chew.
Can you add more detail to : „starting from square pad“
Either its too late at night or I’m just blind.